Command Summary - Cisco CiscoWorks 1105 User Manual

Command Summary

Command Summary
Table B-1 Command Summary
Privilege
Command Level
auth 15
backup 15
backupconfig 15
cdp 15
clock 15
df 15
erase config 15
exit 0
gethostbyname 15
fsck N/A
firewall
hostname 15
import 15
install configure 15
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
B-4
Table B-1 summarizes all commands available on the WLSE. Refer to the full
description of commands that you are not familiar with before using them.
Summary Description
Enables secure remote authentication.
Backs up the WLSE.
Sets the configuration for all backup
and restore operations.
Configures the Cisco Discovery
Protocol (CDP).
Sets the WLSE's date and time.
Display the current storage usage on
the WLSE.
1
Erases the configuration in Flash
memory and reload the device.
Logs user out of the WLSE.
Displays IP address of a known domain
name.
2
Checks and repairs the filesystem.
Implements port filtering on the
WLSE.
Changes the system hostname.
Imports host files, or to maps IP
addresses to hostnames.
Configures the repository that the
Wireless LAN Solution Engine uses to
install updates.
Appendix B Command Reference
Location of Full Description
"auth" section on page B-17
"backup" section on
page B-18
"backupconfig" section on
page B-19
"cdp" section on page B-20
"clock" section on page B-21
"df" section on page B-22
"erase config" section on
page B-23
"exit" section on page B-10
"gethostbyname" section on
page B-25
"fsck" section on page B-76
"firewall" section on
page B-24
"hostname" section on
page B-25
"import" section on page B-26
"install configure" section on
page B-27
78-14947-01