Cisco CiscoWorks 1105 User Manual page 428

Privilege Level 15 Commands
Example
Related Commands
df
Usage Guidelines
Example
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
B-22
To set the date and time, use the set option.
If you configure the system to use Network Time Protocol (NTP), you do not need
to set the system clock manually using the clock command.When setting the
clock, enter the current time in Coordinated Universal Time (UTC).
For more information about the system time, refer to "Setting System Date and
Time" in the Installation and Configuration Guide for the Cisco 1105 Wireless
LAN Solution Engine.
This command sets the date and time:
clock set 16:00:00 dec 11 2001
Tue Dec 11 16:00:00 UTC 2001
ntp server
show clock
To display the current storage usage on the WLSE, use the df command.
df
This command in primarily intended as a debugging tool for problems with full
partitions.
The following command displays the current storage usage on the WLSE:
df
Filesystem
/dev/sda12
/dev/sda1
/dev/sda7
Size Used Avail Use% Mounted on
151M 59M 92M 39% /
49M 2.8M 44M 6% /boot
985M 24M 911M 3% /extra
Appendix B Command Reference
78-14947-01