Cisco CiscoWorks 1105 User Manual page 83

Chapter 3 Configuring Devices
Procedure
Select Association > Policy Group. The Association: Policy Group dialog box
Step 1
appears.
Click see details to see which versions this option is valid for.
Step 2
Note
Using this option you can:
Step 3
•
•
Adding or Deleting a New Policy Group
To add a new policy group, enter the following:
Step 1
Field
GroupID
Group Name
Ethertype
Receive
Transmit
IP Protocol
78-14947-01
Clicking Clear removes all the current entries in the window and any
entries you have made in other Template windows up until that point.
Add and delete a policy group—See
page 3-29.
Delete an exiting Policy Group From a Device—See
Policy Group from a Device, page
Description
Enter an identification number for the policy group.
Enter a name for the policy group.
Enter the ID of a defined Ethertype filter, or select one of
the filters you created using Association > Ethertype
Filters.
Enter the ID of a defined Ethertype filter, or select one of
the filters you created using Association > Ethertype
Filters.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Adding or Deleting a New Policy Group,
Deleting an Existing
3-30.
Using the Templates
3-29