Erase Config - Cisco CiscoWorks 1105 User Manual

Appendix B Command Reference

erase config

Syntax Description
Usage Guidelines
Caution
Example
78-14947-01
/dev/sda8
/dev/sda6
/dev/sda13
/dev/sda9
/dev/sda10
/dev/sda5
To erase the configuration in flash memory and reload the software, use the erase
config command.
erase config
This command has no arguments or keywords.
Use this command to erase the configuration in flash memory and reload the
WLSE software.
When you enter the command, you are prompted for confirmation. Enter yes to
confirm, or press Enter to accept the default response no.
When you confirm this command, the system configuration is erased and the
system reboots automatically. The system will not operate until you reconfigure
it.
When the system reboots, you must reconfigure it with the setup program. For
information about using the setup program, refer to the Installation and
Configuration Guide for the Cisco 1105 Wireless LAN Solution Engine.
This command erases the system configuration:
erase config
This will erase your configuration, return device t
o factory defaults, and reload the device
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
601M 32M 569M
1001M 136M 865M 14% /opt
9.7G 32M 9.7G
601M 32M 569M
591M 212M 350M 38% /usr
2.9G 450M 2.5G 15% /var
Privilege Level 15 Commands
5% /home
0% /tftpboot
5% /tmp
B-23