Specifying Ntp Time Servers - Cisco CiscoWorks 1105 User Manual

Managing the Appliance
Note
Step 1
Step 2

Specifying NTP Time Servers

Note
Step 1
Step 2
Step 3
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
6-70
To set the UTC time, use the following CLI command:
clock {set hh:mm:ss month day year}
For more information on this command see the User Guide for the CiscoWorks
1105 Wireless LAN Solution Engine—From the online help, click View PDF.
Your login determines whether you can use this option.
Procedure
Select Administration > Appliance > TIME/NTP/NAME.
In the Current Time area, select the new time and date parameters from the lists
and click Update.
This option allows you to maintain the current time on the WLSE by using NTP
(Network Time Protocol) servers.
Your login determines whether you can use this option.
Procedure
Select Administration > Appliance > TIME/NTP/NAME.
To remove an NTP server, select it from the Current Servers list and click
Remove.
To add an NTP server, enter the server's IP address in the NTP Server IP Address
text box and click Enable.
Chapter 6 Performing Administrative Tasks
78-14947-01