Displaying A Router Summary Report - Cisco CiscoWorks 1105 User Manual

Chapter 5 Using Reports
Step 5
Step 6
Step 7

Displaying a Router Summary Report

Step 1
Step 2
Step 3
78-14947-01
Click View. The report is displayed with the following headings:
Table 5-27 AP and Bridge Connected to Switch Report
Column Description
Device Port The device port.
AP Name The name of the access point or bridge connected to the
switch.
AP IP Address The IP address of the access point or bridge connected to
the switch.
Status (Fault) The fault status.
Click for details. For more information, see
Fault Summary Report, page
To export the report, click Export. (See
To email the report, click Email Report. (See
Procedure
Select Reports > Current. The window refreshes with a device selector in the left
pane.
If you want to search for the device, use the dialog box in the left pane above the
device selector:
a. From the list, select the method you want to use to search for the device: by
name or by IP address.
Enter the IP address or name, or use an asterisk (*) as a wildcard to denote
b.
numbers and letters, then click Search. The requested device appears in the
Search Results folder.
From the device selector in the left pane, click to expand the folder and select the
router for which you want a report. The right pane refreshes.
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Displaying Current Reports
5-3.
Exporting a Report, page
Emailing a Report, page
Viewing the
5-66.)
5-66.)
5-47