Cisco CiscoWorks 1105 User Manual page 170

Using the Templates
Configuring HTTP Settings
Step 1
Step 2
Step 3
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-116
Use this option to configure HTTP settings for the access point.
Procedure
Select Services > HTTP The Services: HTTP dialog box appears.
Complete the following:
Clicking Clear removes all the current entries in the window and any
Note
entries you have made in other Template windows up until that point.
Table 3-37 HTTP Settings
Field
Allow Non-Console Browsing
HTTP Port
Select one of the following in the left pane:
Preview to see your changes before you apply them. (See
•
Template, page 3-131.)
Finish to save the template. (See
•
• Another template category to configure more options. (See
Categories, page 3-2.)
Chapter 3
Description
From the list, select one of the following:
Enable—Use this setting to allow
•
browsing to the management system.
• Disable—Use this setting to make the
management system accessible only
through the console and Telnet
interfaces.
Enter the port through which the access point
provides web access.
Finishing the Template, page
Configuring Devices
Previewing the
3-132.)
Template
78-14947-01