Cisco CiscoWorks 1105 User Manual page 160

Using the Templates
Table 3-30 Start-Up Settings (continued)
Field
DHCP Client Identifier Value
DHCP Class Identifier
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
3-106
Chapter 3
Description
Use this setting to include a unique identifier
in the access point's DHCP request packet.
If you select Other-Non Hardware from
•
the DHCP Client Identifier Type list, you
can enter up to 255 alphanumeric
characters.
If you select any other option from the
•
DHCP Client Identifier Type list, you
can enter up to 12 hexadecimal
characters (numbers 0 through 9, and the
letters A through F).
Click see details to see which versions this
setting is valid for.
Enter the access point's group name.
The DHCP server uses the group name to
determine the response to send to the access
point.
Configuring Devices
78-14947-01