Show Collectorlog - Cisco CiscoWorks 1105 User Manual

Appendix B Command Reference
Example

show collectorlog

Syntax Description
Example
78-14947-01
This command displays the CDP configuration:
show cdp run
CDP protocol is enabled ...
broadcasting interval is every 60 seconds.
time-to-live of cdp packets is 180 seconds.
CDP is enabled on port eth0.
To display the Wireless LAN Solution Engine's collector log, use the show
collectorlog command.
show collectorlog [page] | include matchstring1 [matchstring2]
page Displays command output one screen at a time. Press the
Return key to display the next output screen. Press Ctrl-c to
exit paged output and return to the command prompt.
include Filters the command output to display only the records that
contain the specified string of characters.
matchstring1 String of characters to search for in the command output.
matchstring2 (Optional) Another string of characters to search for in the
command output.
The following command displays the Wireless LAN Solution Engine's collector
log, one page at a time:
show collectorlog page
/var/adm/CSCOets/log/collector.log
2001/12/20 13:43:18 main HSECollector MESSAGE CollectorMain: Waiting
for databas
e to be ready
2001/12/20 13:43:21 main HSECollector MESSAGE CollectorMain: Database
is ready
SNMPThrPool: Instantiated ex.lib.snmp.lib.timer.DynamicThreadPool,
User Guide for the CiscoWorks 1105 Wireless LAN Solution Engine
Privilege Level 15 Commands
B-53
mi