Chapter 2
Configuring Authentication and Accounting Services
Viewing AAA Status and Statistics
Displaying AAA Groups
Displaying RADIUS Server Configuration Information
OL-16202-01
This section contains the following topics:
•
Displaying AAA Groups
Displaying RADIUS Server Configuration Information
•
Displaying TACACS+ Server Configuration Information
•
Displaying LDAP Server Configuration Information
•
Displaying Accounting Configuration Information
•
Displaying Accounting Log Information
•
Displaying Authentication Configuration Information
•
You can display the configured server groups by using the show aaa groups
command. The syntax of this command is as follows:
show aaa groups
For example, to display configured server groups, enter:
host1/Admin# show aaa groups
TACACS:
TACACS_group1
RADIUS:
RAD_group1
LDAP:
LDAP_group2
You can display the configured RADIUS server and group parameters by using
the show radius-server command.
The syntax of this command is as follows:
show radius-server [groups | sorted]
Cisco 4700 Series Application Control Engine Appliance Security Configuration Guide
Viewing AAA Status and Statistics
2-49