Change Password For User Roles; Figure 32 Communication Mode Switching Using Light Guide - ABB Eagle Programming Manual

Figure 32 Communication mode switching using Light Guide

While switching to station mode, if LRC is already in power OFF state then eagle
switch back to AP mode after 15mins.

7.4 Change Password for user roles

In case the user wants to update the password for the device Wi-Fi connection, then
following steps is to be followed.
1. Open Web-HMI and login with "Admin" credentials
2. Navigate to User & Access -> Change Password
3. Select the User role for which password needs to be updated.
4. Type the new password
5. The selected password should be of minimum 4 characters and a maximum 17 ASCII
characters
6. Validate the new password by retyping the same
7. Select "Send to device"
In case the passwords for users need to be reset to factory defaults:
1. Press "Reset Default Passwords"
2. Select "Apply" in the pop up
46