Table of Contents
Advertisement
Safety
Symbol
3.4
Required qualifications for the installation engineer
•
The qualified installation engineer fully knows the EVSE and its safe installation.
•
The installation engineer is qualified to work on high-voltage and high-current
electrical installations.
•
The qualified installation engineer obeys all local rules and the instructions in
the installation manual.
•
It is the responsibility of the owner of the EVSE to make sure that all qualified
installation engineers obey the local rules, the installation instructions, and the
specifications of the EVSE.
3.5
Safety instructions during installation
Preliminary requirements
•
Do not use adaptors or conversion adapters.
•
Do not use cord extension sets.
•
Make sure that there is no voltage on the AC input cables during the complete
installation procedure.
•
Keep unqualified personnel at a safe distance during installation.
•
Only use electrical wires of sufficient gauge and insulation to handle the rated
current and voltage demand.
•
Make sure that the load capacity of the grid is in accordance with the EVSE.
•
Earth the EVSE correctly. Refer to section
•
Make sure that the wiring inside the EVSE is protected from damage and cannot
get trapped when you open or close the cabinet.
•
Make sure that water cannot enter the cabinet.
•
Protect the EVSE with safety devices that the local rules specify.
30
Description
Safety shoes
Safety glasses
1.
•
3.7
.
6AGA000007-0603-EN | 001
Advertisement
Table of Contents
