Security For The Z45 Controller; Z45 Controller Factory Default Settings - Digi SkyCloud Z4500 Series User Manual

Security for the Z45 Controller

Security features for the Z45 Controller and network access can be managed from the Security
Preferences page. Additional security is found by log in control and access levels assigned to users
and web UI pages.
User levels and access levels for the Z45 Controller
n

Z45 Controller factory default settings

n
Log in security on the Z45 Controller
n
Configure a locked login message and disable web server access on a Z45 Controller
n
General security configuration for a Z45 Controller
n
Enable HTTP access and allow LAN and WWAN port access on a Z45 Controller
n
Create an IP White List to limit access to the Z45 Controller
n
Configure SSH Access for a Z45 Controller
n
Z45 Controller factory default settings
Factory default settings disable all access options, with the exception of HTTP access on port 80.
For information on how to reset a device to the default factory settings, see
the default factory
Setting or parameter
Administrative User
name
Administrative password
Administrative IP address 192.168.1.10
Network Configuration
DHCP Server
Administrative LAN and
WAN port
Firewall Status
Welcome to Digi SkyCloud
settings.
Factory default
admin
The unique password found on the device label.
Gateway
For cellular devices: Disabled
Port 80. See Security for the Z45
Enabled. See General security configuration for a Z45
Reset a Z45 Controller to
Controller.
Controller.
76