Custom Menus - Digi CM 32 User Manual

SSH to a Port

Custom Menus

Custom menus are menus created by either root or the system administrator
and are designed for specific users or groups of users. The custom menu
feature enables root or the system administrator to design menus customized
to a user's needs. Custom menus are a method for users to view and access
only those devices they have permission to enter. For details on configuring
custom menus see "Making Custom Menus" on page 53.
Saving and Applying Changes
Changes to the Digi CM configuration done through the web interface can be
saved by choosing Save to flash. These changes are then saved, but the
configuration changes are not immediately in effect. To immediately apply the
configuration changes select the Apply changes command found on the main
menu.
Chapter 1
telnet [IP ADDR] 7003
This example assumes the base socket port of the Digi CM is 7000
(default).
Using an SSH client, establish a connection to the IP address of the Digi
CM using the login name and port number of the port you wish to connect.
For example, to connect to port 3 of the Digi CM using login name admin,
simply enter the following command:
ssh admin@[IP ADDR]:7003
This example assumes the base socket port of the Digi CM is 7000
(default).
Introduction
13