Log In To A Device From Skycloud And Manage Skycloud; Log In To A Device's Web Ui From Skycloud - Digi SkyCloud Z4500 Series User Manual

Log in to a device from SkyCloud and manage
SkyCloud

Log in to a device's web UI from SkyCloud

You can log in to a device's web UI from SkyCloud. This enables you to configure the device.
You will need the SkyCloud user name and password for both the Connect Sensor+ and Z45 Controller.
For the Z45 Controller only: You will need the device's default user name and password to log on to
the device.
Default user name: admin
n
Default password: The password is found on the device label.
n
If the default user name and password do not work, they may have been changed. Contact your
system admin for the updated credentials.
Note As an alternative, you can access the web UI for the device by logging into the device from the IP
address.
1. Navigate to digiskycloud.com in your web browser. The SkyCloud login screen displays.
2. Click Login. The SkyCloud Log In page displays.
3. Enter your user name and password.
User name: This is the user name assigned to you by Digi, and is usually your email
n
address.
Password: Enter the password that was assigned to you when you were registered
n
with SkyCloud. If you have previously logged in and changed your password, enter your
new password.
4. Click Submit to log in to SkyCloud. The SkyCloud map displays.
Welcome to Digi SkyCloud
45