Enable Http Access And Allow Lan And Wwan Port Access On A Z45 Controller; Create An Ip White List To Limit Access To The Z45 Controller - Digi SkyCloud Z4500 Series User Manual

Table of Contents

Advertisement

Security for the Z45 Controller
8. Determine whether to allow NAT traffic to the WAN. From the NAT Traffic to WAN list box,
choose:
Disabled: Selecting this option is discouraged.
n
Enabled: This is the default and it should not be changed.
n
9. Click Update.
Enable HTTP access and allow LAN and WWAN port access on a
Z45 Controller
The Web Administration section of the Security Preferences screen enables you to
enable or disable HTTP access through the WAN, LAN, or both. You can also specify an IP port number
other than 80 for HTTP access through the WAN, LAN, or both.
1.
Log in to a device's web UI from
2. Click Admin Main.
3. In the Services section, click Security Preferences. The Security Preferences page displays.
4. Display the Web Administration section.
5. Select Allow on LAN Interface Port if you want to allow web access over a LAN port. In the
port field, enter the IP port number. The default is 80.
6. Select Allow on WWAN Interface Port if you want to allow web access over a WWAN port. In
the port field, enter the IP port number. The default is 80.
7. Select Enable HTTPS if you want to use secure HTTP. If you do not select this option, non-
secure HTTP is used.
8. In the Session Timeout field, enter the maximum amount of idle time that is allowed before a
session times out. The time is measured in minutes. The default is 10 minutes.
9. Click Update.

Create an IP White List to limit access to the Z45 Controller

You can enable the white list feature to limit access to specified addresses or ranges of addresses.
The white list applies to both WAN and LAN connections. You can also choose to send SMS text
messages to a set of phone numbers.
1.
Log in to a device's web UI from
2. Click Admin Main.
3. In the Services section, click Security Preferences. The Security Preferences screen displays.
4. Scroll to the IP White List section.
5. Select Enabled from the White List Status list box.
Welcome to Digi SkyCloud
Enable HTTP access and allow LAN and WWAN port access on a Z45 Controller
SkyCloud.
SkyCloud.
79

Advertisement

Table of Contents
loading

Table of Contents