Priority/Queue Mapping; Cli Configuration - Tripp Lite NGI-M08POE8-L2 Owner's Manual

6.1.1.3 Priority/Queue Mapping

6.1.1.3.1 CLI Configuration

Node Command
enable show queue cos-map
enable configure terminal
configure queue cos-map <0-7>
<0-7>
configure no queue cos-map
Example:
L2SWITCH(config)#queue cos-map 0 1
Success!
L2SWITCH(config)#queue cos-map 1 2
Success!
L2SWITCH(config)#queue cos-map 2 3
Success!
L2SWITCH(config)#queue cos-map 3 4
Success!
L2SWITCH(config)#queue cos-map 4 5
Success!
L2SWITCH(config)#queue cos-map 5 6
Success!
L2SWITCH(config)#queue cos-map 6 7
Success!
L2SWITCH(config)#queue cos-map 7 0
Success!
L2SWITCH(config)#exit
L2SWITCH#show queue cos-map
The mapping of the Priority to Queue are:
PRIO 0 ==> COSQ 1
PRIO 1 ==> COSQ 2
PRIO 2 ==> COSQ 3
PRIO 3 ==> COSQ 4
PRIO 4 ==> COSQ 5
PRIO 5 ==> COSQ 6
PRIO 6 ==> COSQ 7
PRIO 7 ==> COSQ 0
Description
This command displays the current 802.1p priority
mapping to the service queue.
This command changes the node to configure node.
This command configures the 802.1p priority
mapping to the service queue.
This command configures the 802.1p priority
mapping to the service queue to default.
69