Table of Contents
Advertisement
4
.
9
.
6
.
S
y
s
t
e
4
.
9
.
6
.
S
y
s
t
e
On the Switch Tools Configuration Menu, pressing "L" opens the System Log
Menu as shown in Fig. 4-9-9. This screen displays logs of events caused to
the Switching Hub. By viewing events, you can check activities related to
the Switching Hub, which is useful information for network management.
PN23129K/PN23129A Local Management System
Switch Tools Configuration -> System Log Menu
Entry Time(YYYY/MM/DD HH:MM:SS)
----- -------------------------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page
[P]revious Page
[C]lear System Log
[S]elect Entry Log number
[I]ndividual System Log config
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option
Each event displayed on this screen links to an SNMP trap. Events for which
a trap is set to sent are displayed. The relationship with traps are shown
below.
Note: A maximum of 1024 events are recorded. The event is deleted from an
old event.
m
L
o
g
m
L
o
g
-------------------------------------------
Fig. 4-9-9 System Log
221
Event
Advertisement
Table of Contents
