4.10. PoE (Power Supply Function) Configuration
Configure the PoE setting in "Global configuration mode" and "Interface configuration mode."
SNMP trap sending PoE threshold value configuration command
Global configuration mode
Management method configuration command
Global configuration mode
PoE port enable command
Interface configuration mode
PoE port disable command
Interface configuration mode
PoE port configuration command
Interface configuration mode
PoE configuration command
Interface configuration mode
PoE port configuration display command
Privileged mode
PoE configuration display command
Privileged mode
peth usage-threshold <percent>
peth disconnection-method {next-port | low-priority}
no peth shutdown
peth shutdown
peth limit <value>
peth priority {critical | high | low}
show peth-port
show peth-conf
Fig. 4-17 Display of the PoE/PoE port configuration
(show peth-conf)
(show peth-port)
48