Table of Contents
Advertisement
Contents of Operation from Menu Screen
Contents of the operation and settings that is displayed in MENU screen with [PAUSE/MENU] key is as
following:
[1] (TOOL) ............ Set the setting for the operation of the tool.
[2] (ARMS) ............ Perform settings and operations related to alignment of tool and media, such as automatic
registration mark scanning by ARMS.
[3] (AREA) ............ Set the settings for area, scale, rotation, reverse, etc., of the cutting.
[4] (MEDIA) .......... Set the setting of the condition for the media.
[p] (I/F) ................ Set the settings of the condition for the interfacing with the computer.
[q] (ADV) ............. Set the conditions for the basic operation of the cutting plotter, such as display language,
unit of the measurements and sensor.
[t] (TEST) ............ Does the operation necessary for maintenance, such as self diagnostic test or printout of
the condition settings list.
[u] (MEM.) ............ Perform the operation necessary for output from USB memory.
[PAUSE/MENU] .... It will close the MENU screen and return to default screen.
[SLOW] ................. Displays the position key screen. When media is set, the tool point can be moved.
Operation from COND/TEST key
Tool conditions are set in the setting screens displayed by the [COND/TEST] key.
Up to 8 CONDITION settings can be saved with different settings in numbers 1 through 8.
[COND/TEST] ....... This will clear the CONDITION setting screen and return to default screen.
CE7000-UM-251-9370
MENU screen
CONDITION screen (1-3)
4-17
4
OPERATIONS
Advertisement
Table of Contents
