Detaching The Push Roller Assembly - GRAPHTEC CE7000-40 Service Manual

7.2.18 Detaching the Push Roller assembly

CE7000-40/60
How to detach the Push Roller assembly
(1) Detach the right side cover (Refer to subsection 7.1.1.).
(2) Detach the left side cover (Refer to subsection 7.1.2.).
(3) Disconnect the Control Panel Flexible cable form the main board.
(4) Remove the M3L6 binding head screw holding the Y-motor cover, and then detach the Y-motor cover.
Y Motor Cover
(5) Remove the M3L6 binding head screw holding the cam sensor board, and then detach the cam sensor
board.
(6) Remove the two M3L10 binding head screws holding the cam sensor dog, and then detach it from the
cam shaft.
CE7000-UM-251-9370
Cam sensor board
M3L10 binding head screw
7-49
7 DISASSEMBLY AND REASSEMBLY
M3L6 binding head screw
M3L6 binding head screw
Cam sensor dog