How To Enter The Adjustment Menu - GRAPHTEC CE7000-40 Service Manual

8.10 How to Enter the Adjustment Menu

(1) Turn on the power while pressing the SLOW and ENTER keys.
Or
After turning on the power, press the SLOW and the ENTER keys simultaneously within 2 seconds.
Or
At the ready mode, while the ENTER key is pressing, press the ORIGIN key. And then the plotter is
reset.
While the plotter is resetting, press the SLOW key and ENTER key simultaneously.
(2) Load a media to the plotter.
(3) The plotter displays the following menu.
(4) Press the PAUSE/MENU key to display the following menu.
(5) Press the Right Position key to display the adjustment menu shown below.
CE7000-UM-251-9370 8-17
8 Electrical Adjustment