GRAPHTEC CE7000-40 Service Manual page 116

7 DISASSEMBLY AND REASSEMBLY
(13) Remove the two M3L6 binding head screws holding the washers and detach the washers.
Washer
Bearing
M3L6 binding head screw
(14) Detach the bearing from the drive roller shaft.
(15) Remove the two M3L6 TP screws holding the bearing, and then detach the bearing from the the drive
roller shaft.
M3L6 TP screw
Bearing
(16) Slide out the drive roller shaft from the CE7000-40/60.
Drive roller shaft
CE7000-UM-251-9370 7-42