Table of Contents
Advertisement
(7) Remove the two M3L10 TP screws holding the cam set lever, and then slide it to the right side.
(8) Remove the M3L10 TP screws holding the left cam shaft holder, and then detach the cam shaft holder
from the cam shaft.
(9) Mark the position of push roller stopper as shown in the picture bellow, and then loosen the screw
holding the push roller stopper.
(10) Slide the push roller stopper to the left side of notch of Y rail.
CE7000-UM-251-9370
M3L10 TP screw
Set lever
Stopper screw
Mark the position of stopper here.
Notch of Y rail
Slide the stopper to here.
7-50
7
DISASSEMBLY AND REASSEMBLY
M3L10 TP screw
Cam shaft holder
Advertisement
Table of Contents
