Omron DeviceNet CV Series Operation Manual page 289

RS-232C Units
PARAMETER SET
272
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Data
Data read when the PARAMETER EAD or RS-232C RECEIVE DATA READ
commands are used. The maximum number of bytes is 1,024. Only a maxi-
mum of 152 bytes can be read using an OMRON DeviceNet Master. Be sure
not to exceed the maximum of 152 bytes.
Error Code
The explicit message error code. For details see Error Response on
page 279.
Sets the parameters for the specified RS-232C port.
Command Block
10
Service Code
Destination
node address
Response Block
00 94 00 01
Class ID Instance ID
Attribute
ID
Service code
No. of received
bytes
Source node address
Section 6-2
6 bytes max.
Set values