Omron DeviceNet CV Series Operation Manual page 365

Connectable Devices and Device Current Consumptions
T-branch Taps
T-branch Connector
Power Supply Sharing Taps
Note The Power Supply Sharing Taps are sold through the OMRON 24 Service Co., Ltd.
Connectors for I/O Cable Connections to Sensor Terminals
Connectors for Environment-resistive Slaves
@ @@
DRT1- D C (-1): I/O Connectors
XS2G-D4@@
XS2H-D421-@@@
XS2W-D42@-@@@
348
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Model
DCN1-1C 3 connectors provided (When used on trunk line, 1
drop line can be connected.)
Terminating Resistor can be connected.
DCN1-3C 5 connectors provided (When used on trunk line, 3
drop lines can be connected.)
Terminating Resistor can be connected.
Model
DCN2-1 Shielded T-branch Connector (1 branch)
Model
1485T-P2T5-T5 Required when connecting more than one power
supply.
Countercurrent flow prevention, ground terminal pro-
vided
DCN1-1P One-branch tap for power supply. Use this tap when
connecting a communications power supply.
Two connectors and two fuses are standard.
Model
XS8A-0441 Connector marking: XS8-1
Applicable cable wire size: 0.3 to 0.5 mm
XS8A-0442 Connector marking: XS8-2
Applicable cable wire size: 0.14 to 0.2 mm
Model
Connector male plug assembly
(Crimp-connect or soldered)
Cable with connector on one end
(Male plug on one end, cable wires on one end)
Cable with connectors at both ends
(Male plug on one end, female socket on one end)
Specifications
Specifications
Specifications
Specifications
2
2
Description
Appendix C
Manufacturer
OMRON
OMRON
Manufacturer
OMRON
Manufacturer
Allen-Bradley
OMRON
Manufacturer
OMRON
OMRON
Manufacturer
OMRON