Omron DeviceNet CV Series Operation Manual page 156

Analog I/O Terminals
Components of the DRT1-AD04 and DRT1-AD04H
(Refer to page 312.)
DeviceNet Indicators
Rotary switch
Sets the input ranges.
Communications connector
DIP switch
Pins 1 to 6: Node address setting
Pins 7 and 8: Baud rate setting
Pin 9: Number of inputs setting (4 points or 2 points) [DRT1-AD04 only]
Pin 10: Averaging function setting [DRT1-AD04 only]
DIP Switch Settings
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
DIN track mounting hooks
(Refer to page 124.)
(Refer to page 124.)
(Refer to page 147.)
The following diagram shows the functions of the DIP switch on the DRT1-
AD04 and DRT1-AD04H Analog Input Terminals.
Node address setting
Baud rate
Open-circuit Indicators (DRT1-AD04H only)
(Refer to page 147.)
Corresponding indicator lights when open
circuit is detected.
Terminal block
(Refer to page 146.)
DRT1-AD04 DRT1-AD04H
Averaging
function setting
Not used. (must
be OFF.)
Number of in-
puts setting
(4 pts. or 2 pts.)
Section 4-8
139