Omron DeviceNet CV Series Operation Manual page 106

Transistor Remote I/O Terminals with Connectors
Components of the DRT1-ID32ML and DRT1-ID32ML-1
Top panel
Rotary switches
(Refer to page 87.)
Set the node address.
Buy: www.ValinOnline.com | Phone 844-385-3099 | Email: CustomerService@valin.com
Item
Max. simultaneously ON
input points
Number of circuits
Note All 32 inputs can be ON simultaneously if the Remote I/O Terminal is mounted
facing up, but sufficient space will need to be allowed between Units depend-
ing on the ambient temperature. Refer to the Dimensions diagram on page
page 93 for details.
DeviceNet indicators (Refer to page 312.)
Indicate the status of the Slave, communications,
and inputs (lit when input is ON).
Front panel
DIN track
mounting hooks
Communications
connector
Input Indicators
Name
I0 to I15
II0 to II15
Note "m" is the first word allocated to the Remote Input Terminal.
Specification
32 points (See note.)
32 points with one common
Bottom panel
(Refer to page 87.)
DIP switch
Pins 1 and 2: Baud rate setting
Pins 3 and 4: Reserved (Always OFF.)
Input connector (MIL)
Connects the 32 inputs via a MIL con-
nector. The MIL cable is sold separately.
Meaning
Indicate the status of bits (contacts) 0 to 15 in word m. Lit
when input is ON; not lit when input is OFF.
Indicate the status of bits (contacts) 0 to 15 in word m+1. Lit
when input is ON; not lit when input is OFF.
Section 4-5
89