Chapter
6
Settings
This chapter describes the procedure to change the various settings of the microscope and DS-L4 from the screen on
DS-L4. These configurations are performed on [MIC SETUP].
On each screen of the [MIC SETUP] except the [MAIN] screen,
you can go to other setting screens by pressing the button at top
left of the screen.
Press the [SAVE] button after changing the settings.
After making changes to the settings, be sure to press the [SAVE] button on the [MIC SETUP] - [MAIN] screen to save
the settings to the microscope's memory. If the microscope is turned off without saving settings, previous values are
restored. For more information, see "1 Bulk Saving of Settings ([MAIN] Screen)" in this chapter.
Some settings are not configurable depending on the configuration of the microscope.
Configurable settings vary depending on the configuration of the microscope; the settings not configurable are
grayed out. Therefore, actual screens on your system may differ from those shown in the following explanations.
Chapter 6
Settings
(LIVE/VIEW menu →[SETTINGS] → [MIC SETUP])
1-76
[MAIN] screen of [MIC SETUP]