Devices that can be Controlled and Monitored from DS-L4 Connected
4
to ECLIPSE LV150A/LV150NA/LV-NCNT2 Nosepiece Controller 2/
LV-NCNT-N Motorized Nosepiece Controller
When the DS-L4 is connected to ECLIPSE LV150A, LV150NA, LV-NCNT2 nosepiece controller 2, or LV-NCNT-N
motorized nosepiece controller, following devices can be controlled on the DS-L4.
Configurations required before using accessories vary depending on the type of accessories you use. Refer to the
following table to perform the required configuration.
Device
LV-NU5A/LV-NU5AC/LV-NU5AI motorized
quintuple universal nosepiece
Devices Whose Status Is Viewable on the DS-L4 Connected to
5
LV-INAD Adapter for Intelligent Nosepiece
When the DS-L4 is connected to the LV-INAD Adapter for Intelligent Nosepiece, the status of the following devices is
viewable on the DS-L4.
Refer to the following table to perform the required configuration.
Device
LV-NU5I intelligent universal quintuple
nosepiece
Chapter 1
Devices Whose Status Is Viewable on DS-L4
Operation Available on DS-L4
Switching objectives
Information Viewable on DS-L4
Address of nosepiece in optical
path, objective lens information
2-3
Required Configuration
Information on attached
objectives
(See Chapter 3, "2.1
Configuring the Objective
Information")
Required Configuration
Information on attached
objectives (See Chapter 3,
"2.1 Configuring the
Objective Information")