Nikon DS-L4 Instructions Manual page 39

Power ON display
When the power is turned on, operation progress is
displayed on the front display panel of the microscope
main body.
For details on initialization indicators for motorized
devices, refer to the Instruction Manual (Operation) for
Ni-E.
Press the power switch of DS-L4 to turn on the
2
unit.
The startup screen appears, and the system configuration,
settings, and other data are acquired from the microscope main
body.
3
Open the [MICROSCOPE CONTROL] screen.
Press the [MENU] button on the DS-L4 screen, then press the
[MIC CNTRL] button to switch to the [MICROSCOPE CONTROL]
screen.
4
Turn on the dia-illumination lamp and adjust the brightness.
(1) Press the [LAMP CTRL] button on the DS-L4 screen to
control the dia-illumination lamp from DS-L4.
Chapter 4
Microscopy with DS-L4
1-27
N i - E V x . x x _ x x x x . x x x x . x x
D a t a _ L o a d i n g . . .
Top: Model name, firmware version
Bottom: Program startup progress
N i - E V x . x x _ x x x x . x x x x . x x
I n i t i a l i z i n g . . . . . . . . . . . .
Top: Model name, firmware version
Bottom: Motorized device initialization
progress
When DS-L4 has control
Power
switch