Nikon DS-L4 Instructions Manual page 145

Enabling/Disabling the Toggle Function
5.5.1
[Procedure]
[MIC SETUP] → [MOVEMENT]
(1) Press the [SET] button under [NOSEPIECE TOGGLE]
(this operation is not required for Ci-E. Go to the next
step.)
(2) Press the [OFF], [PATTERN 1], or [PATTERN 2] button
under [NOSEPIECE TOGGLE] to select the action
when nosepiece rotation/reverse rotation button is
pressed.
To quit setting, press the [X] button. (Ni-E only)
(3) Press the [OK] button (this operation is not required
for Ci-E).
[MOVEMENT] screen is displayed.
When using Ni-E or Ni-U, be sure to press the [SAVE] button on the [MAIN] screen to save the settings to the
microscope's memory after making changes to the settings. If the microscope is turned off without saving settings,
previous values are restored. For more information on saving, see "1 Bulk Saving of Settings ([MAIN] Screen)" in this
chapter.
When using Ci-E, this setting cannot be saved to microscope's memory.
Chapter 6
Settings
(For Ni-E/Ni-U)
(For Ni-E/Ni-U)
(For Ci-E)
1-133