Table of Contents
Advertisement
Showing/Hiding the [SLEEP] Button
4.1.2
In this section, you configure whether to display the [SLEEP] button to use the sleep function. In order to display the
[SLEEP] button on the [MIC EASY] screen, you must first place the [SLEEP] button in the screen. See "4.1.1 Selecting the
Buttons to be Displayed" in this chapter.
Setting Item
[SLEEP BUTTON]
[Procedure]
[MIC SETUP] → [BUTTON FUNC]
Show/hide the [SLEEP] button by pressing the [SLEEP
BUTTON] button.
ON (show)/OFF (hide) toggles each time you press the
[SLEEP BUTTON] button.
After making changes to the settings, be sure to press the [SAVE] button on the [MAIN] screen to save the settings to the
microscope's memory. If the microscope is turned off without saving settings, previous values are restored. For more
information on saving, see "1 Bulk Saving of Settings ([MAIN] Screen)" in this chapter.
Chapter 6
Setting Value
ON
Shows the [SLEEP] button
OFF (default)
Hides the [SLEEP] button
Settings
Description
1-101
Advertisement
Table of Contents
Troubleshooting
