Table of Contents
Advertisement
Chapter 2
Operation Button (Ni-E)
[LOAD]
[LOAD (MODE number)]
[Z-axis RESET]
[ESCAPE]
[XYZ]
[Specimen Removal Position]
[SLEEP]
Basics of Microscope Operation with DS-L4
Function
Loads a saved mode.
Resets the Z-axis coordinate
displayed on DS-L4 to zero
(0.000um).
Moves the microscope's
elevating section to the retracting
position. Press the button again
to restore it to the original
position.
Moves the microscope's
elevating section to the retracting
position, and the motorized XY
stage to the sample removal
position (front). Pressing the
button again restores only the
motorized XY stage to the
original position.
Enters the sleep state to reduce
noise.
1-13
Description
Chapter 5, "2.3 Loading a
Mode"
Chapter 5, "1.18.1
Zero-resetting the Z-axis
Coordinate"
Chapter 5, "1.18.2
Retracting the Elevating
Section"
Chapter 5, "1.18.3
Retracting the Elevating
Section and Moving the
Stage to the Specimen
Removal Position"
Chapter 5, "3 Entering the
Sleep State (Noise
Reduction)"
Advertisement
Table of Contents
Troubleshooting
