Nikon DS-L4 Instructions Manual page 68

Switching the ND for the Motorized HG Precentered Fiber Illuminator
1.12.2
Operation with the [INTSL] Button
Display Status of the [INTSL] Button
[MICROSCOPE CONTROL] Screen
Ni-E Displayed by default
Ni-U Displayed by default
(For details on displaying/hiding the buttons, refer to Chapter 6, "4.1.1 Selecting the Buttons to be Displayed".)
[Procedure]
(1) Press the [INTSL] button.
(2) Press the button for the ND to be used.
The ND is switched. The button for the currently selected
ND is highlighted (with a check mark on the
[MICROSCOPE CONTROL] screen, or with a yellow frame
on the [MIC EASY] screen).
Direct Operation with [Intensilight (ND number)] Buttons
Display Status of [Intensilight (ND number)] Buttons
[MICROSCOPE CONTROL] Screen
Ni-E Can be displayed by setting
Ni-U Can be displayed by setting
(For details on displaying/hiding the buttons, refer to Chapter 6, "4.1.1 Selecting the Buttons to be Displayed".)
[Procedure]
Press an [Intensilight (ND number)] button.
The ND is switched. The button for the currently selected
ND is highlighted (with a check mark on the
[MICROSCOPE CONTROL] screen, or with a yellow frame
on the [MIC EASY] screen)..
Chapter 5
Individual Operations
[MIC EASY] Screen
Displayed by default
Displayed by default
[MICROSCOPE CONTROL] Screen
[MIC EASY] Screen
[MIC EASY] Screen
Can be displayed by setting
Can be displayed by setting
[MICROSCOPE CONTROL] Screen
[MIC EASY] Screen
1-56
Number of the current ND
ND number
ND number