Table of Contents
Advertisement
Turning the Dia-illumination Lamp/LED ON/OFF
1.14.2
[Procedure]
(1)
Press the [LAMP]/[LED] button.
(This operation is not required on the [MICROSCOPE
CONTROL] screen. Go to the next step.)
Following screens are for Ni-E/Ni-U. For Ci-E, it is
displayed as [LED] instead of [LAMP].
(2)
Press the [LAMP ON/OFF]/[LED ON/OFF] button to
turn ON/OFF.
The lamp/LED turns ON/OFF each time the [LAMP
ON/OFF]/[LED ON/OFF] button is pressed.
(DS-L4 must have control of the lamp/LED. For details on
the control, refer to "1.14.1 Transferring the Control of the
Dia-illumination Lamp/LED".)
Adjusting the Brightness of the Dia-illumination Lamp/LED
1.14.3
[Procedure]
(1)
(For [MICROSCOPE CONTROL] screen)
Press the [ADJ.] button.
(For [MIC EASY] screen)
Press the [LAMP]/[LED] button.
Following screens are for Ni-E/Ni-U. For Ci-E, it is
displayed as [LED] instead of [LAMP].
(2)
Move the slider to adjust the brightness.
(DS-L4 must have control of the lamp/LED. For details on
the control, refer to "1.14.1 Transferring the Control of the
Dia-illumination Lamp/LED".)
For improved color reproduction
(Ni-E, Ni-U only)
On Ni-E and Ni-U, change in lamp voltage will affect
the color of the illumination. Where color
reproduction is of significance, press the [PHOTO]
button to adjust the lamp voltage to the voltage that
offers optimal color reproduction. (The [PHOTO]
button turns yellow. The yellow indicator on the slider
will not move.) Use ND filters for brightness
adjustment.
Chapter 5
Individual Operations
[MIC EASY] Screen
[MICROSCOPE CONTROL] Screen
[MICROSCOPE CONTROL] Screen
[MIC EASY] Screen
[PHOTO] button
1-59
Advertisement
Table of Contents
Troubleshooting
