Adjusting the DIA Aperture Diaphragm (Motorized Universal Condenser)
1.10
To adjust the aperture diaphragm in the motorized universal condenser, use the [A. STOP] button.
Prerequisite for motorized operation
A motorized universal condenser must be attached to the microscope in order to perform the following operation.
Display Status of the [A. STOP] Button
[MICROSCOPE CONTROL] Screen
Ni-E
Displayed by default
(For details on displaying/hiding the buttons, refer to Chapter 6, "4.1.1 Selecting the Buttons to be Displayed".)
[Procedure]
(1)
Press the [A. STOP] button.
(2)
Move the slider to adjust the diameter of the aperture
diaphragm.
Chapter 5
Individual Operations
[MIC EASY] Screen
Can be displayed by setting
[MICROSCOPE CONTROL] Screen
[MIC EASY] Screen
1-53
Current diameter of the
aperture diaphragm