Configuring The Toggle Function (Alternating Between Two Objectives) - Nikon DS-L4 Instructions Manual

Configuring the Toggle Function (Alternating between Two Objectives)

5.5
Toggle function allows you to view the specimen while alternately switching between two objectives configured in advance.
This operation is performed with the microscope's or ergo controller's nosepiece forward rotation/reverse rotation buttons.
Two pairs of objectives can be configured: toggle pattern 1 and toggle pattern 2.
Prerequisite for configuration
In order to perform this configuration, the motorized nosepiece must be attached.
Setting Item
[OFF] (default)
[PATTERN 1]
[NOSEPIECE
TOGGLE]
[PATTERN 2]
Default toggle patterns
Setting Item
[PATTERN 1] 1, 2
[PATTERN 2] 3, 4
Chapter 6
Action When the Nosepiece Rotation/Reverse Rotation
Setting Value
Turns off the toggle function.
Switching between two addresses configured in the toggle
pattern 1.
Switching between two addresses configured in the toggle
pattern 2.
Addresses Used
1-132
Settings
Button Is Pressed