[Procedure]
[MIC SETUP] → [MOVEMENT]
Switch the setting by pressing the [NOT-LIMITED] or
[LIMITED] button under [NOSEPIECE REVERSE
ROTATION].
After making changes to the settings, be sure to press the [SAVE] button on the [MAIN] screen to save the settings to the
microscope's memory. If the microscope is turned off without saving settings, previous values are restored. For more
information on saving, see "1 Bulk Saving of Settings ([MAIN] Screen)" in this chapter.
Chapter 6
Settings
(For Ni-E/Ni-U)
(For Ci-E)
1-131