Turning On/Off The Buzzer - Nikon DS-L4 Instructions Manual

Turning ON/OFF the Buzzer

6.3
You can enable or disable the buzzer which sounds when you press the operation buttons.
Setting Item Target of the Configuration
The buzzer when you press the
[Ni-E]
operation buttons of Ni-E main body
The buzzer when you press the
[ERGC]
operation buttons on the ergo controller
[Procedure]
[MIC SETUP] → [UTILITY]
Press the [Ni-E] or [ERGC] button under [BUZZER] to
enable or disable the buzzer.
The buzzer ON/OFF is toggled each time you press the
button.
After making changes to the settings, be sure to press the [SAVE] button on the [MAIN] screen to save the settings to the
microscope's memory. If the microscope is turned off without saving settings, previous values are restored. For more
information on saving, see "1 Bulk Saving of Settings ([MAIN] Screen)" in this chapter.
Chapter 6
Settings
Setting Value
ON (default)
OFF
ON
OFF (default)
1-138
Description
Buzzer ON
Buzzer OFF
Buzzer ON
Buzzer OFF