Loading A Mode - Nikon DS-L4 Instructions Manual

Loading a Mode

2.3
To restore the microscopy state stored as a mode, use the [LOAD] button or the [LOAD (MODE number)] buttons.
(For details on saving a mode, refer to "2.2 Saving/Updating a Mode (State of Motorized Devices)".)
Operation with the [LOAD] Button
Display Status of the [LOAD] Button
[MICROSCOPE CONTROL] Screen
Ni-E Displayed by default
Ni-U Displayed by default
(For details on displaying/hiding the buttons, refer to Chapter 6, "4.1.1 Selecting the Buttons to be Displayed".)
[Procedure]
(1) Press the [LOAD] button.
(2) Press the button for the mode to be restored.
The stored microscopy state is restored.
Direct Operation with [LOAD (MODE number)] Buttons
Display Status of [LOAD (MODE number)] Buttons
[MICROSCOPE CONTROL] Screen
Ni-E Can be displayed by setting
Ni-U Can be displayed by setting
(For details on displaying/hiding the buttons, refer to Chapter 6, "4.1.1 Selecting the Buttons to be Displayed".)
[Procedure]
Press the [LOAD] button.
The stored microscopy state is restored.
Chapter 5
Individual Operations
[MIC EASY] Screen
Displayed by default
Displayed by default
[MIC EASY] Screen
Can be displayed by setting
Can be displayed by setting
1-71