Nikon DS-L4 Instructions Manual page 19

Microscope information (MIC INFO) on MIC EASY screen
Press the [◄] or [►] button or swipe the microscope information area to move to a different page of information.
(In the figure below, all displayable information is shown. If there is any motorized device unattached, that motorized
device state is not displayed.)
X (X coordinate of the
motorized XY stage)
Y (Y coordinate of the
motorized XY stage)
Z (Z coordinate of the
microscope's elevating section)
Nosepiece:
Objective series name (brevity
code), magnification/numerical
aperture, immersion type
Dia-illumination lamp: ON/OFF
DSC zooming port:
Zoom magnification
Second epi-fluorescence
cube turret:
Filter cube name
OPEN /CLOSE
First epi-fluorescence
cube turret:
Filter cube name,
OPEN /CLOSE
HG precentered fiber illuminator:
ND, OPEN /CLOSE
Motorized universal condenser:
Condenser module name
DIA aperture diaphragm
diameter
DIA field diaphragm diameter
Motorized ND filter wheel:
Transmittance
EPI/DIA/AUX motorized shutter:
OPEN /CLOSE
SLEEP: DS-L4 is in sleep mode
AWAKE: DS-L4 is awake
Chapter 2
Basics of Microscope Operation with DS-L4
1-7
Dia-illumination lamp control:
DISABLE: Cannot be controlled
by DS-L4/
ENABLE: Can be controlled
by DS-L4
Motorized barrier filter wheel:
Filter wavelength
Motorized excitation filter wheel:
Filter wavelength
Optical path in motorized
quadrocular tilting tube:
BINO (Binocular)
FRONT (Tube adapter)
REAR (Rear port)