Table of Contents
Advertisement
Changing the Motorized Device to be Operated with CW/CCW Button
4.2.4
You can change the motorized device to be operated with the CW/CCW buttons on the Ni-E main body.
Setting Item
[CW/CCW BUTTON]
[L:FL / R:OBJ.]
[L:OBJ. / R:FL]
(default)
[L:OBJ. / R:OBJ.]
[Procedure]
[MIC SETUP] → [BUTTON FUNC]
Choose the device to be operated among the options in the
[CW/CCW BUTTON].
After making changes to the settings, be sure to press the [SAVE] button on the [MAIN] screen to save the settings to the
microscope's memory. If the microscope is turned off without saving settings, previous values are restored. For more
information on saving, see "1 Bulk Saving of Settings ([MAIN] Screen)" in this chapter.
Chapter 6
Setting Value
CW/CCW buttons on the left
Motorized epi-fluorescence
cube turret
Motorized Nosepiece
Motorized Nosepiece
1-107
Settings
Target of the Operation
CW/CCW buttons on the right
Motorized Nosepiece
Motorized epi-fluorescence cube
turret
Motorized Nosepiece
Advertisement
Table of Contents
Troubleshooting
