Screens For Ni-U; Microscope Control Screen (Ni-U) - Nikon DS-L4 Instructions Manual

3

Screens for Ni-U

The displayed content will differ depending on the configuration and settings of your microscope.
The screen only shows devices that are connected to the microscope and recognized by DS-L4. For this reason,
the composition of the screen differs depending on the configuration of the microscope. For information on
microscopes and devices that can be recognized by DS-L4, refer to Chapter 1, "Motorized Units Operable from
DS-L4".
The button layout on the [MICROSCOPE CONTROL] and [MIC EASY] screens can be customized. For details on
changing the button layout or displaying/hiding the buttons, refer to Chapter 6, "4.1.1 Selecting the Buttons to be
Displayed".

MICROSCOPE CONTROL Screen (Ni-U)

3.1
The [MICROSCOPE CONTROL] screen is used to operate the motorized parts of the microscope. The default (factory
setting) button layout is shown below.
Operation buttons
(objectives, etc.)
Press a button to
operate the
corresponding
motorized device.
The selected
button is displayed
with a check mark.
Moves to the
[MIC SETUP] -
[MOVEMENT]
screen.
A button for opening
an operation sub
screen (nosepiece,
FL turret, etc.)
Press the button to
open a sub screen at
the bottom of the
screen.
Sub screen
Example of a sub screen with a slider (Lamp adjustment)
Chapter 2
Basics of Microscope Operation with DS-L4
Operation buttons
Press a button to operate the corresponding
motorized device. The selected button is
displayed with a check mark.
Slider
Available operations:
- Dragging the round marker being pressed
- Pressing the [◄] or [►] button
- Pressing the area to the left or right of the round marker (for greater
movement than when using the [◄] or [►] button)
1-14
These buttons are
enabled when the
DS-L4 has control
of the lamp.
ON/OFF or
open/close button
(lamp, motorized
shutter, etc.)
Indicates the
current status with
an icon. Each time
the button is
pressed, the status
switches and the
corresponding
motorized device
operates.
Closes the sub
screen.