Table of Contents
Advertisement
[Procedure]
[MIC SETUP]→[MODE]
(1)
Press the mode button to be used.
(2)
Press the [MODIFY] button, then the [OK] button.
To cancel adding or saving, press the [CANCEL] button.
(3)
Press the [INPUT] button to enter a name for the mode,
and then press the [ENTER] button.
Up to 4 characters can be used for the mode name. The
default name is [MD1] - [MD8].
Pressing the
button removes a character at the end of
the data you entered.
Press the
button to switch between upper and lower
case alphabets.
To quit setting, press the [X] button.
(4)
Press the [NEXT] button.
Chapter 5
Individual Operations
1-68
Advertisement
Table of Contents
Troubleshooting
