2
Operation
■ Button Operation
Problem
(Only with LV150A, LV150NA,
LV-NCNT2, and LV-NCNT-N)
Buttons on the nosepiece does
not work.
3
Setting
Problem
Settings are restored to the
previous value when DS-L4 is
turned on.
Chapter 4
Troubleshooting
Cause
Motorized nosepiece is not
properly connected to the
microscope or nosepiece
controller.
Cause
Settings are not saved.
2-25
Measure
Turn off the microscope (or nosepiece controller)
and DS-L4, then connect or attach the motorized
nosepiece correctly.
Measure
After configuring, be sure to press the [SAVE]
button on the [MIC SETUP] - [MAIN] screen to
save settings.
See Chapter 3, "1 Bulk Saving of Settings ([MAIN]
Screen)".