Table of Contents
Advertisement
(5)
Select the magnification of the objective attached to
the microscope and press the [NEXT] button.
To return to the previous screen, press the [BACK] button.
(6)
Press the [INPUT] button, enter the numerical aperture
of the attached objective, and then press the [ENTER]
button.
Pressing the
button removes a character at the end of
the data you entered.
(7)
Press the [NEXT] button.
(8)
Select the immersion type of the objective attached to
the microscope and press the [NEXT] button.
Chapter 3
Settings
2-17
Advertisement
Table of Contents
Troubleshooting
