Direct Operation with [Condenser Module (Address)] Buttons
Display Status of [Condenser Module (Address)] Buttons
[MICROSCOPE CONTROL] Screen
Ni-E
Can be displayed by setting
(For details on displaying/hiding the buttons, refer to Chapter 6, "4.1.1 Selecting the Buttons to be Displayed".)
[Procedure]
Press the [Condenser Module (Address)] button.
The condenser module is switched. The button for the
currently selected condenser module is highlighted (with a
check mark on the [MICROSCOPE CONTROL] screen, or
with a yellow frame on the [MIC EASY] screen).
Chapter 5
Individual Operations
[MIC EASY] Screen
Can be displayed by setting
[MICROSCOPE CONTROL] Screen
[MIC EASY] Screen
1-52
Turret address
Condenser module name
Turret address
Condenser module name