Nikon DS-L4 Instructions Manual page 116

(3) Select the function you want to assign.
The selected function is shown with a check mark.
Pressing the [CLEAR] button assigns no function to the
button and the button display becomes blank.
(4) Repeat steps (2) and (3) for all buttons of which you
want to change the functions.
(5) Press the [OK] button.
[BUTTON FUNCTION] screen is displayed.
After making changes to the settings, be sure to press the [SAVE] button on the [MAIN] screen to save the settings to the
microscope's memory. If the microscope is turned off without saving settings, previous values are restored. For more
information on saving, see "1 Bulk Saving of Settings ([MAIN] Screen)" in this chapter.
Chapter 6
Settings
1-104