Switching The Condenser Module (Motorized Universal Condenser) - Nikon DS-L4 Instructions Manual

Switching the Condenser Module (Motorized Universal Condenser)

1.9
To switch the condenser module in the motorized universal condenser, press the [CONDEN.] button or a [Condenser
Module (Address)] button.
Prerequisite for motorized operation
A motorized universal condenser must be attached to the microscope in order to perform the following operation.
Operation with the [CONDEN.] Button
Display Status of the [CONDEN.] Button
[MICROSCOPE CONTROL] Screen
Ni-E Displayed by default
(For details on displaying/hiding the buttons, refer to Chapter 6, "4.1.1 Selecting the Buttons to be Displayed".)
[Procedure]
(1) Press the [CONDEN.] button.
(2) Press the button for the condenser module to be used.
The condenser module is switched. The button for the
currently selected condenser module is highlighted (with a
check mark on the [MICROSCOPE CONTROL] screen, or
with a yellow frame on the [MIC EASY] screen).
Chapter 5
Individual Operations
[MIC EASY] Screen
Displayed by default
[MICROSCOPE CONTROL] Screen
[MIC EASY] Screen
1-51
Address of the turret currently
in the optical path
Condenser module name